GO1525
Voltage Controlled Oscillators
Description
Features
Applications
Downloads
The GO1525 is a self contained, miniature Voltage Controlled Oscillator (VCO). It produces a clean 1.485GHz reference clock signal for the GS1560 and GS9060 deserializers, and for the GS1532 and GS9062 serializers. The control voltage range is from 1.0 volts to 1.5 volts and is derived from the on-chip PLLs. The GO1525 frequency can be pulled approximately 32MHz for every one volt of control.
The output level is typically -9.0dBm with low spurious and noise content. It is designed to drive 50 Ohm strip lines.
The VCO requires a single 2.5V supply and draws a maximum of 15mA of current. It is packaged in a miniature 8-pin proprietary surface mount package and operates over the normal commercial temperature range of 0°C to +70°C.
This component and all homogeneous subcomponents are RoHS compliant.
GO1555 for new designs
The GO1555 should be used for new designs given that it is smaller, consumes less power and gives better jitter performance.
- generates 1.485GHz or 1.485/1.001GHz signal for HD-LINX™ II ICs
- low current consumption
- 50 Ohm output impedance
- operates from a single 2.5V supply
- 8 pin tape on reel
- Pb-free and RoHS Compliant
VCO for the GS1560, GS1559 and GS9060 Deserializers, and the GS1532, GS1531 and GS9062 Serializers
Ordering Information| Part No | Package | GO1525-CTAE3
| 8 pin Tape |
|
