GS9092A

In addition to serializing the input data stream, the GS9092A performs NRZI-to-NRZ encoding and scrambling as per SMPTE 259M-C when operating in SMPTE mode. When operating in DVB-ASI mode, the device will insert K28.5 sync characters and 8b/10b encode the data prior to serialization.

Parallel data inputs are provided for 10-bit multiplexed formats at SD signal rates. A 27MHz parallel clock input signal is also required.

The integrated cable driver features an adjustable signal swing and common mode operating point offering fully compliant SMPTE 259M-C cable driver connectivity.

The GS9092A includes a range of data processing functions such as automatic standards detection and EDH support. The device can also insert TRS signals, re-map illegal code words, and generate and insert SMPTE 352M payload identifier packets. All processing features are optional and may be enabled/disabled via external control pin(s) and/or host interface programming.

The GS9092A also incorporates a video line-based FIFO. This FIFO may be used in four user-selectable modes to carry out tasks such as data delay, clock phase interchange, MPEG packet insertion and clock rate interchange, and ancillary data packet insertion.

The device may also be used as a low-latency parallel-to-serial converter where the SMPTE scrambling block will be the only processing feature enabled.

The GS9092A is Pb-free, and the encapsulation compound does not contain halogenated flame retardant (RoHS compliant).

Integrated line-based FIFO for data alignment/delay, clock phase interchange, DVB-ASI data packet insertion, and ancillary data packet insertion

User selectable additional processing features including:

ANC data checksum, and line number calculation and insertion

TRS and EDH packet generation and insertion

illegal code remapping

Enhanced Gennum Serial Peripheral Interface (GSPI)

JTAG test interface

+1.8V internal cable driver and core power supply

Optional +1.8V or +3.3V digital I/O power supply

Small footprint (8mm x 8mm)

Low power operation (typically 200mW)

Pb-free and RoHS compliant

• SMPTE 259M-C Serial Digital Interfaces
• DVB-ASI Serial Digital Interfaces