GS2962

Overview

The GS2962 is an SDI transmitter, generating a SMPTE 424M, SMPTE 292M, SMPTE 259M-C or DVB-ASI compliant serial digital output signal.

The integrated ClockCleaner™ allows the device to accept parallel clocks with high input jitter, and still provide a SMPTE compliant serial digital output.

The device can operate in four basic user selectable modes: SMPTE mode, DVB-ASI mode, Data-Through mode, or Standby mode.

In SMPTE mode, the GS2962 performs all SMPTE processing features. Both SMPTE 425M Level A and Level B formats are supported with optional conversion from Level A to Level B for 1080p 50/60 4:2:2 10-bit.

In DVB-ASI mode, the device will perform 8b/10b encoding prior to transmission.

In Data-Through mode, all SMPTE and DVB-ASI processing is disabled. The device can be used as a simple parallel to serial converter.

The device can also operate in a lower power Standby mode. In this mode, no signal is generated at the output.

The GS2962 includes a fully SMPTE-compliant cable driver for SMPTE 259M-C, SMPTE 292M and SMPTE 424M interfaces. It features automatic dual slew-rate selection, depending on 3G-, HD- or SD-SDI operational requirements.

Features/Highlights

  • Integrated low noise VCO and integrated ClockCleanerTM
  • SMPTE video processing including TRS calculation and insertion, line number calculation and insertion, line based CRC calculation and insertion, illegal code re-mapping, SMPTE 352M payload identifier generation and insertion
  • Integrated cable driver
  • Supports SMPTE 425M (Level A and Level B), SMPTE 424M, SMPTE 292M, SMPTE 259M-C and DVB-ASI
  • Operation at 2.970Gb/s, 2.970/1.001Gb/s, 1.485Gb/s, 1.485/1.001Gb/s and 270Mb/s
  • Ancillary data insertion
  • Optional conversion from SMPTE 425M Level A to Level B for 1080p 50/60 4:2:2 10-bit
  • Parallel data bus selectable as either 20-bit or 10-bit
  • GSPI Host Interface
  • 1.2V digital core power supply, 1.2V and 3.3V analog power supplies, and selectable 1.8V or 3.3V I/O power supply
  • -20°C to +85°C operating temperature range
  • Low power operation (370 mW typical, including cable driver)
  • Small 11mm x 11mm 100-ball BGA package
  • Pb-free and ROHS compliant

    • Key Applications

    • Cameras
    • Camera Control Units
    • Multiviewers
  • Production Switchers
  • Master Control Switchers
  • VTRs
  • Video Servers
  • Encoders/Decoders
  • Up/Down/Cross Converters
  • Audio Embedders
  • Format Detectors
  • Test and Measurement Equipment

    • Ordering Information

    Part No

    Package

    GS2962-IBE3

    100 ball BGA

    EBK-GS2962-00 
    RDK-3GRXTXOXLNX00 
    RDK-3GRXTXOALTR00 

    DocumentTypeSize
    		Broadcast Video Product GuideBrochure1 MB
    		GS2962 Product BriefProduct Brief334 kB

    Restricted Downloads

    DocumentTypeSize
    application/pdfEB-GS2962 Design GuideReference Design664 kB
    application/pdfEB-GS2962 User GuideUser Guide788 kB
    application/octet-streamGS2962 BSDL (dedicated JTAG port)BSDL Model12 kB
    application/octet-streamGS2962 BSDL (shared JTAG port)BSDL Model12 kB
    application/pdfGS2962 Data SheetDatasheet2.4 MB
    application/octet-streamGS2962 IBIS ModelIBIS Models4.2 MB
    application/pdfGS2962 vs. GS2972Information Note218 kB
    application/pdfGS2962-IBE3 Certificate of ComplianceCertificate32 kB
    application/pdfGS2962-IBE3 Material Composition SheetRoHS Document37 kB


    mygennum Account Required - Log in to your mygennum account for access

    Please contact mygennumsupport@gennum.com with any questions regarding your account.

    © Copyright 2012 Gennum Corporation. All rights reserved.