GS1560A / GS1561

When used in conjunction with the GS1524 Automatic Cable Equalizer and the GO1555/GO1525* Voltage Controlled Oscillator, a receive solution can be realized for HD-SD, SD-SDI and DVB-ASI applications. In addition to reclocking and deserializing the input data stream, the GS1560A/GS1561 performs NRZI-to-NRZ decoding, descrambling as per SMPTE 259M-C/292M, and word alignment when operating in SMPTE mode. When operating in DVB-ASI mode, the device will word align the data to K28.5 sync characters and 8b/10b decode the received stream.

Two serial digital input buffers are provided with a 2x1 multiplexer to allow the device to select from one of two serial digital input signals.

The integrated reclocker features a very wide Input Jitter Tolerance of ±0.3 UI (total 0.6 UI), a rapid asynchronous lock time, and full compliance with DVB-ASI data streams.

The GS1560A includes an integrated cable driver is for serial input loop-through applications. It can be selected to output either buffered or reclocked data. The cable driver also features an output mute on loss of signal, high impedance mode, adjustable signal swing, and automatic dual slew-rate selection depending on HD/SD operational requirements.

The GS1560A/GS1561 also includes a range of data processing functions such as error detection and correction, automatic standards detection, and EDH support. The device can also detect and extract SMPTE 352M payload identifier packets and independently identify the received video standard. This information is read from internal registers via the host interface port.

Line-based CRC errors, line number errors, TRS errors, EDH CRC errors and ancillary data checksum errors can all be detected.

Finally, the device can correct detected errors and insert new TRS ID words, line-based CRC words, ancillary data checksum words, EDH CRC words, and line numbers. Illegal code re-mapping is also available. All processing functions may be individually enabled or disabled via host interface control.

The GS1560A/GS1561 is Pb-free and the encapsulation compound does not contain halogenated flame retardant.

* For new designs use GO1555

BSDL Model
Contact your Gennum representive for the BSDL model for this device.

Serial loop-through cable driver output selectable as reclocked or non-reclocked (GS1560A only)

Dual serial digital input buffers with 2 x 1 mux

Integrated serial digital signal termination

Integrated reclocker

Automatic or manual rate selection / indication (HD/SD)

Descrambler bypass option

User selectable additional processing features including:

CRC, TRS, ANC data checksum, line number and EDH CRC error detection and correction

Programmable ANC data detection

Illegal code remapping

Internal flywheel for noise immune H, V, F extraction

FIFO load Pulse

20-bit / 10-bit CMOS parallel output data bus

148.5MHz / 74.25MHz / 27MHz / 13.5MHz parallel digital output

Automatic standards detection and indication

Pb-free and Green

1.8V core power supply and 3.3V charge pump power supply

3.3V digital I/O supply

JTAG test interface

Small footprint compatible with GS9060, GS1532, and GS9062 Applications

• SMPTE 292M Serial Digital Interfaces
• SMPTE 259M-C Serial Digital Interfaces
• DVB-ASI Serial Digital Interfaces

Part No

Package