GS2974A

The GS2974A is designed to support SMPTE 424M, SMPTE 292M and SMPTE 259M, and is optimized for performance at 1.485Gb/s and 2.97Gb/s.

The GS2974A features DC restoration to compensate for the DC content of SMPTE pathological test patterns.

A voltage programmable mute threshold (MCLADJ), applicable for HD and SD mode (refer to Section 5.2), is included to allow muting of the GS2974A output when an approximate selected cable length is reached for SMPTE 259M signals. This feature allows the GS2974A to distinguish between low amplitude SD-SDI signals and noise at the input of the device. The serial digital outputs of the GS2974A may be forced to a mute state by applying a voltage to the MUTE pin.

Power consumption is typically 215mW using a 3.3V power supply. The GS2974A is lead-free, and the encapsulation compound does not contain halogenated flame retardant.

This component and all homogeneous subcomponents are RoHS compliant.

Supports DVB-ASI at 270Mb/s

Small footprint (4mm x 4mm)

Pb-free and RoHS compliant

Manual bypass (useful for low data rates with slow rise/fall times)

Performance optimized for 1.485Gb/s and 2.97Gb/s

Typical equalized length of Belden 1694A cable: 120m at 2.97Gb/s, 200m at 1.485Gb/s, and 350m at 270Mb/s

50Ohm differential output (internal 50Ohm pull-ups)

Programmable mute based on max cable length adjust

Single 3.3V power supply operation

Operating temperature range: 0°C to +70°C

• SMPTE 424M, SMPTE 292M and SMPTE 259M Coaxial Cable Serial Digital Interfaces

Part No	Package
GS2974ACNE3	16 pin QFN